Xantech RT16-10 User Manual download pdf



Remote Control Switchers

Fig. 2 ID Code Switch

INSTALLATION INSTRUCTIONS

RT16-10

ADDRESSABLE INFRARED ROUTER

The RT16-10 is a ONE-IN/SIXTEEN-OUT IR switcher which directs an infrared control signal to any one

of 16 output ports, any combination of ports, or all 16 as a group. You can control large groups of TV

monitors (or any other A/V product) from control locations using Xantech IR Receivers or Smart Pads. Up

to 16 devices may be addressed with one RT16-10. Additional RT-10's can be connected for control of

larger numbers of devices, such as TV monitors in a sports bar, by using different IR code groups on each

unit. The "I" and "G" output ports can drive LED indicators placed at each controlled device location so that

you can see which devices are being addressed at any given time.

ON (1)

OFF (0)

1 2 3 4 5 6

Address Switches

Single/Multiple

Routing Switch

ON (1) - Multiple

OFF (0) - Single

Contoller Select Switch

ON (1) - CTR16

OFF (0) - RC68+

Fig. 1 Model RT16-10 Addressable IR Router

1 2 3 4 5 6

Factory Installed Jumper.

DATA IN

DATA OUT

OGGI

13 57 911 1315

I = INDICATOR, O = OUTPUT, G = GROUND, S = SIGNAL

IR RCVR

INPUT

+12 G G

POWER

12 VOLTS

1 AMP D.C.

ID CODE SWITCH

IGGO IGGO IGGO IGGO IGGO IGGO IGGO IGGO

RT16 -10

•

ADDRESSABLE IR ROUTER

FEATURES AND SPECIFICATIONS

•The RT16-10 requires the XANTECH RC68+ (or RC68) Hand Held Programmer codes, set to a matching

IR Code Group, to address 16 ports individually or in any combination of groups.

• GP-ON (group on) and GP-OFF (group off) codes from the RC68+ select and deselect all 16 ports together

as a group.

• The factory preset IR Code Group is 70. It can be installer changed by use of the RC68+ Programmer.

• ID CODE SWITCH. Switches 2 ~ 6 of this 6 position

DIP swtich are reserved for future enhancements.

NOTE: The unit willnot operate with RC68+ IR control

signals unless switches 2~6 are all set to the OFF

psition. Switch 1 selects between single and multiple

routing. OFF = Single Routing, ON = Multiple Routing.

• The DATA IN and DATA OUT modular jacks allow

future cascading enhancements.

• One IR input on a 4-terminal plug-in connector permits connection of any Xantech IR Receiver, Keypad,

Controller, etc.

• An LED, adjacent to the IR RCVR INPUT, flashes when any IR commands are received (not just those

that are RT16-10 specific).

• 16 IR "O" and "G" emitter outputs and 16 "I" and "G" indicator outputs are located on 16 plug-in connectors.

• The "I" and "G" indicator outputs are current limited to 25 mA, allowing the direct connection of an LED

without the need for a current limiting resistor.

• Power Jack: 2.1mm. 12V DC @ 1 Amp. Requires one 782-00 Power Supply for each RT16-10.

• Universal mounting fits 19" racks.

• Dimensions: 19" x 3 1/2" x 1 1/4".

• Weight: 1 lb. 3 oz.

1 2 3 4 5 6

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

1Remote Control SwitchersFig. 2 ID Code SwitchINSTALLATION INSTRUCTIONSRT16-10ADDRESSABLE INFRARED ROUTERThe RT16-10 is a ONE-IN/SIXTEEN-OUT IR swi

Page 2 - 1 2 3 4 5 6

21 2 3 4 5 6ON0Controller &AddressSwitchesON (1)OFF (0)RC68 PROGRAMMER / REMOTE CONTROLThe RC68+ (or RC68) Programmer (available separately) con

Page 3 - Remote Control Switchers

3Remote Control Switchers1 2 3 4 5 6ON1Controller &AddressSwitchesON (1)OFF (0)Factory InstalledJumperIR ReceiverInput Connectoron RT16-10IR RCVR

Page 4

4INSTALLATIONFig. 5 illustrates a typical application where an RT16-10 is used to route IR control signals to 15 TV monitors.1. For this example, it

Page 5 - TV's

5Remote Control Switchers+12 VDCIR OUTGND780-10J-BOX RECEIVER283M283MBlink-IR™Mouse EmitterTo Emitterson evennumberedTV's+12VIR OUTGNDUse additi

Page 6 - ADDRESSABLE IR ROUTER

611-7-00RF/IRRFIRCPL10RF/IRRFIRCPL10RF/IRRFIRCPL10RF/IRRFIRCPL10RF/IRRFIRCPL10RF/IRRFIRCPL10RF/IRRFIRCPL10RF/IRRFIRCPL10CPL10Coupler(30 locations)601

Comments to this Manuals

No comments

Xantech RT16-10 User Manual

Browse online or download User Manual for Routers Xantech RT16-10. Xantech RT16-10 User's Manual

Summary of Contents

Comments to this Manuals