Xantech CC62 User Manual download pdf



Remote Control Switchers

INSTALLATION INSTRUCTIONS

CC62

REMOTE RELAY MODULE

Fig. 1 The Model CC62 Remote Relay Module

RELAY

CC62

REMOTE RELAY MODULE

IR CONFIRM

12 VDC

+12V

GND

IR IN

The CC62 Remote Relay Module consists of six double-pole double-throw relays which are controlled by

way of IR commands from a Xantech RC68+ (or RC68) Programmer. The RC68+ commands are "taught"

to learning devices and passed to the CC62 IR IN (S) and G input terminals via Xantech IR receivers,

keypads, etc. The six relays give "dry contact" closures for a multitude of uses where simple contact

closures are needed. Any combination of one to six relays may be selected and operated in several ways

using the commands from the RC68+ Programmer.

FEATURES AND SPECIFICATIONS

• 6 double-pole double-throw relays rated at 5 Amps. 30 volts DC.

• 2 normally open and 2 normally closed contacts per relay.

• Six 6-terminal screw-type plug-in connectors - one for each of the relays.

• Each relay and the relay poles are isolated from each other allowing use in circuits of differing potentials

and grounds.

• 4-terminal IR IN and +12V plug-in for Xantech IR Receivers, Smart Pads, connecting blocks and other

devices.

• IR Confirm LED lights with RC68+ and non RC68+ IR signals.

• RC68+ IR commands permit Pair, Toggle, Momentary and Group mode operations as well as different

IR codes for use of multiple CC62's.

• The CC62's Code Group number is 60.

• Universal mounting fits 19-inch racks or any 3-1/2" X 19" flat surface. Extends about 2-3/4" behind panel

with cables connected.

• Requires RC68+ (or RC68) Programmer and 782-00 Power Supply.

• Power: 12 VDC @ 300mA.

• Dimensions: 19" W x 3-1/2" H x 2-1/4" D

RC68+ PROGRAMMER / REMOTE CONTROL

The RC68+ Programmer (available separately) contains all commands necessary to operate the CC62 (see

Fig. 2).

• You will need it to program universal learning devices such as the Xantech URC-1 learning remote, the

Xantech Smart Pads, the 590 Controller, the 710 Fone Link, etc., with commands that operate the CC62.

1 2 3 4 5

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

1Remote Control SwitchersINSTALLATION INSTRUCTIONSCC62REMOTE RELAY MODULEFig. 1 The Model CC62 Remote Relay ModuleNONCNONCNONCNONCNONCNONCNONCNONCNO

Page 2 - Fig. 2 RC68+ Programmer

2CC62• NOTE: The RC68+ codes operate several other Xantech models as well, such as the RS41AV, CC12,ZPR68, etc. Therefore, only the button descripti

Page 3 - Remote Control Switchers

3Remote Control SwitchersCC62The CC62 should normally be plugged into an unswitched AC outlet. However, if the power to the CC62is interrupted by a

Page 4 - MAIN ROOM

4Fig. 4 A Typical Multiroom AV Receiver/Amp A/B Switching SystemNONCNONCNONCNONCNONCNONCNONCNONCNONCNONCNONCNONCRELAY1RELAY2RELAY3RELAY4RELAY5RELAY6

Page 5 - IMPORTANT

5Remote Control SwitchersRELAY1RELAY2RELAY3RELAY4RELAY5RELAY6CC62REMOTE RELAY MODULEIR CONFIRM12 VDC1ANONCNONCNONCNONCNONCNONCNONCNONCNONCNONCNONCNON

Comments to this Manuals

No comments

Xantech CC62 User Manual

Browse online or download User Manual for Unknown Xantech CC62. Xantech CC62 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Xantech CC62