Xantech D5KP User Manual download pdf (Page 12)

- 12 -

ZONE OUT – D5SH, D5SH4

The ‘ZONE OUT’ RJ-45 connector’s interface with D5KP Amplified Keypad through CAT-5 cables

wired to the T-568A Standard. These connectors carry IR information from the keypad as well as

audio information to the D5KP Amplifier Keypad. Status information is also carried between the

D5SH, D5SH4 chassis and the Amplifier Keypads. While a great deal of information is handled by the

‘ZONE OUT’ connections, the connections are straightforward. Simply connect CAT-5 cables

terminated to the T-568A configuration (Figure 2.0) from each Amplifier Keypad to the corresponding

‘ZONE OUT’ connector as shown in Figure 3.0.

Note: For wire runs up to 150', the CAT-5 connections are all that is necessary. For wire runs over 150', use the AUX

POWER OUT connectors as described in the section entitled Auxiliary Power Connector (AUX POWER OUT).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

Xantech D5KP User Manual Page 12