Xantech D5KP User Manual download pdf (Page 6)

- 6 -

Pre-Wiring

D5RH and D5SH, D5SH4 Digital Audio Distribution Hub to D5KP Amplifier Keypad

The D5SH4 and all associated components are wired using CAT-5 terminated to the T-568A Wiring

Standard (Figure 2.1). When pre-wiring, run lengths of CAT-5 from the pre-determined R5RH and

D5SH, D5SH4 Digital Distribution Hub location (the “head-end”) to each Amplifier Keypad location.

The CAT-5 routes all audio, power, IR and status information needed for full system operation. Use a

110 Punch-down tool to connect the CAT-5 wiring to the Digital Audio Distribution Hub.

Note: For maximum performance over long runs (more than 150 ft) run an additional 16AWG 2-

conductor wire for external power.

12345678

12 34 56 78

GREEN/WHITE

GREEN

ORANGE/WHITE

BLUE

BLUE/WHITE

ORANGE

BROWN/WHITE

BROWN

Shown tab

down

Figure 2.1: T-568A Wiring Standard

D5KP Amplifier Keypad to Speakers

Run 16AWG 2-conductor stranded copper speaker wire between the D5KP Amplifier Keypad

locations and speaker locations.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Xantech D5KP User Manual Page 6